The printer was developed in the Czech Republic based on approximately 9 years of experience with solid and precise construction from aluminum profiles and blanks with a minimum of printed parts made of carbon material.

• Proven and reliable single-jet extruder with a maximum working temperature of 300 °C
• fully usable print space 235x235x300mm-0.4mm nozzle (can be fitted with 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9 and 1mm nozzle)
• heated printing table with a maximum working temperature of 130 ° C
• Possibility of printing from SD card, USB flash drive or via USB port from PC, or Repetier-Server, OctoPrint, AstroPrint, etc.
• WiFi module for remote control of the printer
• 5" touch LCD for easy and friendly operation
• 9-point auto-leveling with BL-Touch sensor measurement
• automatic alignment of Z-axis
• detection of filament running low-integrated LEDlightingof print space
• removable magnetic printing plate with PEI surface or PET foil
• Possibility of printing common printing materials with a diameter of 1.75 mm, such as ABS. PLA, ASA, PETG, HIPS, Flex, and materials with a higher melting point up to 300 ° C
• 32bit control board based on STM32 CPU with digitally controlled silent stepper motor drivers
• NEMA17 stepper motors well cooled thanks to the solid aluminum construction
• travels equipped with linear guide manufactured by HIWIN
• transmissions with quality toothed belts of GT2 profile
• maximum print speed 200mm / s
• step resolution in Z-axis 0.0025mm
• step resolution in X / Y axes 0.025mm